Avoiding Wall Damage: Common Problems and Solutions in the Use of Hollow Wall Anchor?

When using Hollow Wall Anchors, there may indeed be some issues that, if not handled properly, can cause damage to the wall surface.
common problem
Improper installation leads to loosening or detachment of the anchor body
Reason: It may be due to selecting an inappropriate anchor size or not fixing the anchor correctly during installation.
Solution: Before installation, ensure that the anchor size matches the wall material and load-bearing requirements. During installation, it is necessary to strictly follow the product instructions to ensure that the anchor body is fully embedded in the wall and firmly fixed.
Wall cracking or damage
Reason: Excessive force may have been used during the installation process, or the anchor position may have been improperly selected, such as near a wall corner or electrical conduit.
Solution: Before installation, carefully check the condition of the wall to avoid installing anchors in sensitive areas such as corners and electrical conduits. At the same time, use appropriate tools and force for installation to avoid causing excessive impact on the wall.
The anchor body cannot be fully embedded into the wall
Reason: The wall material is too hard or too soft, or the anchor design is not suitable for the current wall material.
Solution: Choose the appropriate anchor type based on the wall material. For harder walls, anchor bodies with stronger penetration may be needed; For softer walls, such as gypsum board walls, anchor bodies specifically designed for such walls should be used.
There is water seepage or mold around the anchor body
Reason: It may be due to inadequate waterproofing during the installation of the anchor body, or water seepage issues on the wall itself.
Solution: Before installation, ensure that the wall is dry and free of water seepage. During installation, an appropriate amount of waterproof coating or sealant can be applied around the anchor body to enhance the waterproof effect. If there is water seepage on the wall itself, the problem should be solved first before installing the anchor body.
Solution Summary
Choose the appropriate anchor body: Select the appropriate anchor body size and type based on the wall material and load-bearing requirements.
Correct installation: Strictly follow the product instructions to ensure that the anchor body is fully embedded in the wall and firmly fixed.
Check the wall condition: Carefully inspect the wall condition before installation to avoid installing anchors in sensitive locations.
Waterproof treatment: Apply an appropriate amount of waterproof coating or sealant around the anchor body to enhance the waterproof effect.
Addressing wall issues: If there are problems such as water seepage on the wall, these issues should be resolved before installing the anchor body.